How to use hot -melt Dual Caulking Guns and precautions

Hot melting Dual Caulking Gun is a decoration tool that is generally used for material coating, which can bare various materials such as wood, plastic, metal. How to use hot -melt Dual Caulking Guns? First insert the hot -melt rubber strip into the rubber gun, then insert the plug into the power socket, wait for a few minutes after powering. After the hot melting glue is completely heated, the hot melting Dual Caulking Gun can be squeezed out of the hot melting glue. Apply, squeeze and apply it along the place where you need to be fixed. Let's understand how to use hot -melt Dual Caulking Guns and precautions.

How to use hot -melt Dual Caulking Guns:

Insert a hot melt rubber stick.

Turn the Dual Caulking Gun trigger and wait for heating.

The outlet of the hot melting Dual Caulking Gun is aimed at items that need to be bonded.

Dip the Dual Caulking Gun trigger and hit the rubber out.

Waiting for a moment, after the hot melting glue is completely solidified, you can release the trigger and remove the Dual Caulking Gun.

Precautions for hot -melt rubber guns:

Before the hot -melt Dual Caulking Gun is plugged in the power, please check whether the power cord is intact and whether the bracket is prepared.

The front end of the Dual Caulking Gun has a metal round. It should be vertically downward when used. If you move forward, forward or forward, will affect the use of hot -melt rubber guns.

There is a thin pole at the front end of the glue support, which should be parallel to the tight device at the back end of the Dual Caulking Gun.

When the Dual Caulking Gun is pushed backwards, the body should stand apart to prevent burns.

When installing a hot melting glue stick, please leave a little at the top. The rubber rod cannot be tide, frozen, heated, etc., so as not to deform the rubber rod.

When installing a hot melting rubber stick, insert the rubber stick into the rubber tube, and then press the rubber gun back to the end.

When using a hot melting Dual Caulking Gun, first turn the hot melting rubber stick for half a circle to avoid splashing people.

When replacing the hot -melt rubber rod, turn off the power first to avoid burns.

When removing hot -melt Dual Caulking Guns, turn off the power first to avoid scalding.

When cleaning the hot -melt Dual Caulking Gun, turn off the power first to avoid burns.